The motor is the core of peony seed machinery, peony seed oil machinery can work normally without motor function in the normal use after don't neglect the maintenance of peony seed oil machine, do regular checks of peony seed oil in mechanical and electrical maintenance. In the annual major repair, the motor of the disintegration and maintenance, peony seed oil mechanical motor bearing cleaning or replacement, insulation monitoring, improve the cooling system, to ensure that the motor is in good condition to run.

一定要保证维修质量，牡丹籽油机械电机维修时，要保证各种参数符合原机技术要求，严格控制更换的配件及漆包线的质量，正确操作各道工序，防止人为遗留各种事故隐患，提高修理后的电机运行质量；确保控制系统完好运行。

We must ensure the quality of maintenance, motor maintenance machinery of peony seed oil, to ensure that all parameters meet the requirements of the original machine technology, strictly control the quality of parts and paint replaced the envelope, the correct operation of each procedure, to prevent human from all accidents, improve the motor operation quality after repair; ensure the control system running well.

1.物料的粉碎程度。在操作牡丹籽油机械时，随轧距的减小研磨区域长度便增加，这时，快辊对物料的作用齿数增多而粉碎程度提高，牡丹籽油机械单位流量相应地降低。研磨物料的容量。玉米经逐道研磨，由于胚乳被逐渐刮下，随着皮磨道数的后推，物料的容重便减轻，玉米加工设备单位流量也降低。

1 crushing degree of material. In the operation of the peony seed oil, the length of the grinding area increases with the length of the rolling distance, and the number of the action teeth of the quick roller on the material is increased, and the flow rate of the machine unit of the peony seed oil is reduced correspondingly. Capacity of abrasive materials. By using corn grinding, the endosperm is gradually scraped, with the number of skin mill pusher, bulk density is decreased, the unit of corn processing equipment can reduce traffic.

2.磨齿的高度。在研磨过程中，随着磨齿的逐渐磨损，磨齿便不容易抓住物料，而在磨辊表面上的滑动增加，即物料在研磨区域中的移动速度降低。并由于磨齿高度减少，两磨齿间隙中的物料减少，使牡丹籽油机械产量逐渐降低。

2 height of grinding teeth. During the grinding process, the grinding teeth are not easy to grasp the material, and the sliding on the surface of the grinding roller increases, that is, the movement speed of the material in the grinding area is reduced. The material in the gap of the grinding gear is reduced, and the mechanical output of the peony seed oil is gradually reduced due to the reduction of the grinding tooth height and the clearance between the two grinding teeth.